View subnets and VLANs
Review the subnets and VLANs ARGUNIS knows about from your network devices and see them on the topology map.
On this page
Network → Subnets and VLANs lists the subnets and VLANs on your network. Subnets come from the interface IPs and local routes of your network devices; VLANs come from the links.
Before you begin
Your plan must include the Network module.
Your network devices must be collecting topology. See Enable topology collection on network devices.
Steps
Go to Network → Subnets and VLANs.
In Subnets, review each subnet with its Gateway, the Interface where it was seen, its VLAN, how many Hosts it has, and when it was last seen.
In VLAN, review each VLAN with its Name, and how many Links and how many Hosts use it.
Click View in the graph on any row to open Topology filtered by that subnet or VLAN.
If you don't see subnets, no network device has reported its interface IPs or routes yet. If you don't see VLANs, they don't appear in the links yet: they are read from the switches' address table with VLAN.