DocumentaciónHelp

Network

See how your network devices connect, their subnets and VLANs, discover new hosts and use monitoring probes inside your network.

On this page

The Network menu shows your network topology based on what the monitoring probes read from your switches, routers, firewalls and access points: what is connected to what, the subnets, the VLANs, the links that are down and which IP addresses are free, in use or reserved. It also gathers the hosts the network sees that you do not monitor yet.

The Network menu appears if your plan includes the Network module. Monitoring probes are managed in Settings → Monitoring → Monitoring probes and also depend on your plan.

What you can do

How the topology is built

  1. You install a Install a monitoring probe on your network.

  2. You add your network devices with SNMP from that probe and turn on Collect topology.

  3. The probe reads, in read-only mode, the LLDP/CDP neighbors, the MAC address, ARP and route tables, and the OSPF and BGP neighbors.

  4. ARGUNIS correlates that data and draws the map in Network → Topology.

Related

Search Argunis Monitoring

Type at least 2 characters to search Argunis Monitoring.

↑↓ to navigate · Enter to open · Esc to close