Create a connectivity link
Connect ARGUNIS to a private network with Tailscale or a WireGuard tunnel to monitor hosts that aren't public.
A connectivity link lets ARGUNIS reach a private network from the cloud. Components with a public destination run from the cloud without needing a link; each component chooses whether it runs from the cloud, from a link or from an agent.
Type | How it works |
|---|---|
Tailscale | ARGUNIS joins the customer's tailnet as its own node, with an auth key and its tags |
WireGuard | The customer's host opens a tunnel to a gateway dedicated to your company |
Before you start
The Settings → Vulnerabilities → Connectivity menu appears for administrators, if your plan includes it.
For Tailscale, have an auth key (reusable or ephemeral) with the allowed tags.
For WireGuard, generate the key pair on the customer's host; you only need the public one.
Steps
Go to Settings → Vulnerabilities → Connectivity.
Click New link.
Choose the Link type. If you pick the wrong one, click Change type.
Enter the Name.
Fill in the details for the type:
Tailscale: Tailscale auth key, Node name, Tags, the Login server (Headscale, optional) and whether you want to Accept routes advertised by the tailnet.
WireGuard: Remote host public key and, optionally, the Remote endpoint (optional).
In Destination networks (CIDR), enter each network (for example, 192.168.10.0/24) and click Add network. Checks are only allowed to IPs within these networks; a single IP counts as /32.
Save.
If it's WireGuard, ARGUNIS shows you the configuration for the remote host. You can also see it later with the file icon in the row.
Test the link
In the link's row, click the play icon (Test a destination).
Enter a
host:portdestination within the link's networks (for example, 192.168.10.5:443).Click Test. The result says Destination reachable or Destination unreachable.
Statuses and actions
Statuses: pending, connected, down, error or disabled. For WireGuard, the tunnel address and the last handshake are also shown.
Disable or Enable pauses or resumes the link.
The pencil icon edits it (an empty auth key stays unchanged).
The trash icon deletes it. If components use it, you must change them first.