DocumentaciónHelp

Use the NOC screen

Put ARGUNIS in full screen on a TV or monitor, rotating between the Operations map, Service chain, Live CMDB, Live APM, groups and dashboards at set intervals.

On this page

The NOC screen shows ARGUNIS in full screen, with no menu or assistant, designed for a TV or monitor in the operations room. It rotates on its own between the screens you choose and updates live.

Before you start

  • Your role needs access to Operations map and NOC screen.

  • For a TV, it's best to use a dedicated account with the Viewer role: that way the screen can't change anything.

Open the NOC screen

  1. Go to the Operations map.

  2. Click NOC screen. It opens in full screen.

You can also open it from one of your own dashboards with the NOC screen button: it opens showing that dashboard.

To see only the Live CMDB, go to Core → Live CMDB, choose the Group if you want and click NOC screen: it opens in full screen with the Live CMDB (for that group) as the only screen. The same goes for APM → Live APM.

What it shows

  • At the top: ARGUNIS and your company name, the name of the current screen and its position (for example "2 of 5"), and a large clock with the date.

  • A progress bar showing how long until the next screen.

  • The status banner (All operational or the open incidents), the same as on the Operations map.

  • The content of the current screen.

The cursor hides after a few seconds without moving the mouse, and the screen doesn't turn off while the NOC screen is open (if the browser allows it).

Control the rotation

Button or key

What it does

◀ or left arrow

Previous screen

▶ or right arrow

Next screen

Pause / Resume or space bar

Stops or resumes the rotation

Full screen

Returns to full screen if you left it

Exit

Returns to the Operations map

Choose which screens rotate

  1. Click Configure. While the panel is open, the rotation stops.

  2. In Change every, choose how often it changes: 15 s, 30 s, 1 min, 2 min or 5 min.

  3. In Screens in the rotation, check what you want to show:

    • Operations map

    • Service chain: what each service needs and the probable cause of incidents, for the whole company.

    • Live CMDB (all groups, or one per inventory group: "Live CMDB · ARGUNIS"): your CIs and their dependencies with the status and metrics of each one live, and in red the path from what is affected to its probable cause, using the full height of the screen.

    • Live network (if your plan includes Network): firewalls and routers with their traffic and the networks they route with their hosts.

    • Live APM (if your plan includes APM): all applications or one at a time ("Live APM · ARGUNIS"), with traffic, latency and errors over the last 15 minutes.

    • Any inventory group or subgroup: shows its dashboard.

    • Your own dashboards and those shared with you, which appear as "Dashboard · name".

  4. Click Configure again to close the panel.

The rotation follows the order of the list. If you don't check anything, only the Operations map is shown. The configuration is saved in that browser.

To keep a TV fixed with your configuration, bookmark the address shown at the bottom of the Configure panel (To keep it fixed on a TV, save this address). When that address is opened, the screen starts with those screens and that interval, even if the browser has nothing saved.

What happens with the session

The NOC screen uses your normal session and keeps it active while it is open, for up to 30 days; after that you will have to sign in again. An administrator can close that session like any other.

Related

Search Argunis Monitoring

Type at least 2 characters to search Argunis Monitoring.

↑↓ to navigate · Enter to open · Esc to close