DocumentaciónHelp

Create a monitoring tag

Group tests and syslog and SNMP trap reception into a monitoring tag (for example, "Cisco SNMP switch") and assign it to devices.

On this page

A monitoring tag brings together the tests a type of device needs and, if you want, the reception of its syslog and its SNMP traps. When you assign it to a device, its tests appear in the device's monitors and each monitor says which tag it came from. They used to be called "Templates".

Before you start

  • You need Administer on Plugins (Administrator role or a company role with that level).

  • The tests must already exist (see Create a monitoring test).

Steps

  1. Go to Settings → Monitoring → Monitoring tags.

  2. Click New tag.

  3. Enter the Name and the Description.

  4. In Status, leave Active. An Inactive tag is not assigned and applies nothing.

  5. In Credential type, choose the one its tests use (for example SNMP v1/v2c), or leave Whatever each test requires.

  6. On the Monitors tab, use Filter tests and check the tag's tests.

  7. In Syslog and SNMP traps, check whether the device should send its syslog or its traps to the probe.

  8. If you want it applied automatically to whatever starts being monitored from Discovered, fill in Automatic application (host types and credential).

  9. Click Create tag.

A tag needs at least one test, or to have syslog or SNMP trap reception turned on.

Built-in tags have fixed tests. You can change their status, their credential type, syslog and traps, and the automatic application, or click Copy to change their tests.

The list

For each tag you see its Status, the Credential type, what it Receives (syslog or SNMP traps), how many Tests it has, how many Devices it is assigned to and how many Monitors come from it. Copy creates a copy you can modify.

Assign it to a device

On the host's page, Configure → Tags and macros → Monitoring tags: choose the tag and click Assign. See Configure a host.

  • A probe test is only applied to hosts monitored by a probe, and that probe runs it.

  • An agent test is only applied to servers monitored by their agent, and that agent runs it.

  • A host monitored by ARGUNIS (cloud or integration) does not take tests.

  • The credential comes from the tag if it is the type the test requires; otherwise, from the Device credentials of that type; otherwise, from the one its monitor uses from the probe.

  • Anything that cannot be applied is skipped and the notice says why.

What happens next

  • If you add a test to a tag, it is applied to the devices that already have it.

  • Changes to a test reach its monitors as usual.

  • Removing the tag from a device does not delete the monitors it created: they are removed on the Monitors tab. It doesn't turn off syslog or traps either.

  • If you delete the tag, its monitors keep working (they are left without a tag).

Related

Search Argunis Monitoring

Type at least 2 characters to search Argunis Monitoring.

↑↓ to navigate · Enter to open · Esc to close