Add a host
Add a server or network host by choosing the connection, where it is checked from, and the credential from the vault.
Add a host to Infrastructure so ARGUNIS checks its availability and metrics, and opens incidents when it fails.
Before you start
You need permission to operate in Infrastructure.
Have the host's IP or domain at hand.
The credential (SSH, SNMP or Windows) must be in the vault under Settings → Monitoring → Credentials. If it doesn't exist, you can create it from the same form.
If the host is on a private network, you need an active Monitoring probes on that network.
Each host counts toward your plan's device quota. If the quota is full, the form tells you when you save.
Steps
Go to Infrastructure and choose the category, for example Servers.
Click Add server (the button carries the category name). The Add host window opens.
In Connection, choose how it is checked:
SSH (Linux servers)
SNMP (firewalls, switches, routers, UPS…)
WinRM (Windows servers)
Ping only (availability)
Enter the Name you'll see the host under and its IP or domain.
In Check from, choose who runs the check:
ARGUNIS cloud: only for SSH and SNMP, and only if the host has a public address.
Monitoring probe · name: the probe checks the host from your network. WinRM and ping only are always checked from a probe.
In Credential (vault), choose the credential. Only vault credentials that work for that connection and are allowed for the host's group appear. If it's missing, click Create credential: the vault form opens and, when you save, the new one is selected.
Complete the connection section:
SSH: the SSH port (22 if you leave it empty).
SNMP: the UDP port (161 if you leave it empty). The version and the community or SNMPv3 user come from the credential. From the cloud only SNMP v1/v2c credentials work; for SNMPv3 choose a probe.
WinRM: select HTTPS (5986) or clear it for HTTP, and the Port if it's different.
In Location, review the Category and choose the inventory Group (optional).
If you chose a probe and there are test templates, you can choose one in Test template (CPU, disks, interfaces, etc.). If not, choose No template (availability and metrics only).
Click Add and check.
SSH from the cloud with the ARGUNIS key
If you choose SSH, ARGUNIS cloud and the Company's ARGUNIS SSH key + user option instead of a credential:
Enter the SSH user (
rootby default).Before saving, authorize the ARGUNIS key on the server. The form shows the command you must run once on the server; copy it exactly as shown.
If you enter a private IP (for example 10.x, 172.16-31.x or 192.168.x) and choose ARGUNIS cloud, the form warns you: the cloud can't reach private networks. In Check from, choose a monitoring probe installed on that network.
What happens next
The host page opens on the Monitoring tab.
A notice tells you whether the first check worked, or shows the connection error.
If a probe checks it, the notice says the probe will check it in its next cycle.
If you chose a template, the notice says how many tests were applied. If the template fails, the host is still created.
The probe checks the host with default values. Logs, extra checks and receiving syslog or traps are adjusted later with Configure or with Add a host from a monitoring probe.