DocumentaciónHelp

Monitor a discovered host

Review the hosts your probes or the network topology found and move them to Infrastructure with Monitor.

On this page

Network → Discovered gathers the hosts found by your probes' network inventory and those seen by your network devices' topology that are not in Infrastructure (LLDP/CDP neighbors, edge MACs, OSPF and BGP peers). They do not enter the system, the Network map or the plan quota until you monitor them.

Before you start

  • Your plan must include the Network module.

  • To monitor a host or change its status, you need the administrator role and permission to operate on Servers.

Review the discovered hosts

  1. Go to Network → Discovered.

  2. In View, choose Hosts. At the top you see how many are new, known, monitored and ignored.

  3. Filter by Status: To review, New, Monitored, Ignored or All. If you have several probes, also filter by probe.

  4. Search by IP, name, model, MAC or vendor.

  5. Review each row: IP (and the probe that saw it), MAC, Vendor, Type (with the likely operating system), Name (and model), when it was last and first Seen, and its Status. The topology tag means a network device saw it; sensitive, that a job on a sensitive network saw it.

  6. Click the IP to see everything known about the host.

Monitor a host

  1. Click the monitor icon in the host's row. For several, select them and click Monitor in the action bar.

  2. Confirm with Monitor.

What happens when you confirm:

  • Each host is created in Infrastructure according to its type, checked from the probe that saw it. It counts toward the plan quota.

  • If a host with that IP already exists, it is linked to it instead of duplicating it.

  • It starts with availability only (ping) from the probe. To get metrics, open its page and switch it to SNMP, SSH or WinRM with Monitor from the probe, or install the agent. Credentials are requested only then.

  • In the list, the host changes to Monitored with a link to its page.

If a host does not have a known IP yet, it cannot be monitored. The IP is filled in when the inventory or a network device's ARP table sees it.

Mark as known or ignore

Select one or more hosts and use the action bar:

  • Known: you already know what it is, but you are not going to monitor it.

  • Ignore: you set it aside; you find it under the Ignored filter. You can also use the ignore icon in the row.

  • Mark as new: returns it to new.

  • Clear selection.

Related

Search Argunis Monitoring

Type at least 2 characters to search Argunis Monitoring.

↑↓ to navigate · Enter to open · Esc to close