DocumentaciónHelp

Receive syslog and traps on the probe

Turn on syslog and SNMP trap reception on a monitoring probe and choose which hosts they are received from.

On this page

The probe can receive the syslog messages and SNMP traps your hosts send it. What is received appears on each host's page and in its logs.

Before you start

  • You need the administrator role to change the probe's reception.

  • The hosts must be configured to send syslog or traps to the probe's IP.

Step 1: turn on reception on the probe

  1. Go to Settings → Monitoring → Monitoring probes and open the probe.

  2. In Syslog and trap reception, select what you want to receive and, if you want, change the port:

    • Syslog UDP (514 by default).

    • Syslog TCP (514 by default).

    • Syslog TLS (6514 by default).

    • SNMP traps (UDP) (162 by default).

  3. Click Save reception.

The probe listens on those ports inside its container. The probe's Portainer stack or docker compose must publish the same ports (for example 514:514/udp, 514:514/tcp, 6514:6514/tcp and 162:162/udp); otherwise, what the hosts send does not arrive.

Syslog UDP and traps cannot use the same UDP port, and syslog TCP and TLS cannot use the same TCP port.

Step 2: choose the hosts

Each host indicates whether its messages are received:

  1. Open the host's page and click Configure.

  2. In Logs and traps, Reception on the probe section, select Receive syslog from this host or Receive SNMP traps from this host.

  3. Click Save.

You can also do this in Monitor from the probe, Received from this host section. There the screen shows you what the chosen probe receives and warns you if its reception is off.

What happens next

  • In the host's Monitoring tab, the Monitoring from the probe panel shows Received from this host with the syslog messages and traps received (and the discarded ones, if any).

  • The messages appear in the host's Logs tab.

Related

Search Argunis Monitoring

Type at least 2 characters to search Argunis Monitoring.

↑↓ to navigate · Enter to open · Esc to close