Available blocks
The catalog of blocks you can put on a dashboard, what each one shows and which ones depend on your company's plan.
On this page
All dashboards are built with the blocks in this catalog. Each block shows data from the dashboard's scope (the whole company, a group or the scope you gave the block) and from the selected time range, always filtered by what the viewer can see.
Blocks marked “if your plan includes it” only appear when your company has that module.
Overall status
Block | What it shows |
|---|---|
Indicators | Operational components, availability, servers and open incidents in large figures. |
Component status | Each component as a colored cell, with the total by type. |
Components | Compact table with status, latency and availability for the range. |
Incidents | Active incidents first and then those in the range. |
Availability and SLA | Availability for the range against the target based on the group's criticality: 99.9 % for high criticality, 99.5 % for medium (also on Overview) and 99 % for low. |
Availability heat map | Availability by component and time interval, with the worst ones at the top. |
Site map | Sites with their status and the Infrastructure objects with no site. See “Site map” block. |
Service chain | What each service needs, live, with the probable cause of related incidents. |
Live CMDB | Your CIs and their dependencies in a dark, animated scene: at the top what depends on others and at the bottom the infrastructure; each CI with its status, up to three live metrics (CPU, RAM, disk, latency, HTTP, SSL or duration) and its incident. The flow goes up through each dependency and the path from what is affected to its probable cause is shown in red. CIs with no dependencies appear separately at the end. |
Infrastructure
Block | What it shows |
|---|---|
CPU and RAM over time | Average and maximum CPU and RAM of the servers in scope. |
Gauges | Current average CPU, RAM and disk usage of the servers. |
Top usage | The 10 servers with the highest CPU, RAM or disk usage. |
Databases | Database status by engine, space, sessions and locks. |
Database space | The fullest tablespaces and data files. |
Plugin checks | Status of each plugin assigned to the servers (OK, warning, critical, unknown) with its last output. |
Test metrics | Chart of the metrics returned by an object's monitoring test. See “Test metrics” block. |
Topology | Network devices and trunk links with their live status, and the links that are down. If your plan includes Network. |
Live network | The internet, your firewalls and routers with their real traffic and, below each one, the networks it routes (from Network → IP addresses) with their hosts and status; at the bottom, the networks with no host routing them and the other network devices. It is the same scene as Live network. It refreshes every 15 seconds; How it works explains where each part is configured. |
Applications
Block | What it shows |
|---|---|
APIs by step | Time of each step in the last result of the API monitors, availability for the range and their named metrics. |
UX tests by step | Duration of each step in the last run and success rate for the range. If your plan includes UX tests. |
APM: p95, errors and traffic | Instrumented services with their p95 response time, error rate and calls per minute. If your plan includes APM. |
Risk and security
Block | What it shows |
|---|---|
Risk (Cerebro) | Components most likely to fail according to Cerebro. If your plan includes Cerebro. |
Security detections | SIEM detections by severity in the range and open cases. If your plan includes Security (SIEM). |
Critical vulnerabilities | Open findings by severity and the most recent critical and high ones. If your plan includes Vulnerabilities. |
Cloud costs
These blocks appear if your plan includes Costs.
Block | What it shows |
|---|---|
Period spend | Cloud spend for the current period against the same span of the previous one, and by provider. |
Forecast vs. budget | Forecast at the end of the period against the company or group budget. |
Top costs | The 10 cloud resources that cost the most this month. |
Possible savings | Estimated monthly savings from open recommendations and the top ones. |
Unit cost | Cost of each service per unit of traffic (for example, per payment) and its change. |
Blocks you configure
Some blocks need you to choose something. You do it inside the block while you customize the dashboard (Customize button) or while you edit one of your own dashboards:
Service chain: in Scope, choose the dashboard's scope (the whole company or the group with its subgroups) or One item and what it needs… and search for it by name. The graph shows each item with its status (Operational, With warnings, Incident or down, No data) and marks the Probable cause of incidents. Click an item to open its incident or its page.
Topology: in Site, choose Whole network or a site.
Test metrics: choose the object, the test and the metric. See “Test metrics” block.
Sizes
Each block supports some of these sizes: S (small), M (medium) and L (large). Wide blocks, such as Indicators or Site map, can only be set to M or L.