DocumentaciónHelp

Treat a risk

Choose how to respond to a risk, mark the controls that already exist and the ones you propose and, if you mitigate it, create its action plan.

On this page

Treating a risk means deciding what you do about it and associating the ISMS controls that treat it: the ones that already exist and the ones you propose to implement. If you decide to mitigate it, SofIA Governance creates, in the same step, the action plan to implement the proposed controls, with its deadline and owner. The risk's controls are also what define which standards it affects.

Before you start

  • You need the Editor or Administrator role.

  • The risk must be saved. See Register a risk.

  • The ISMS must have applicable controls (they are created when you adopt a standard). Controls excluded from the SoA can't be chosen. See Standards and compliance.

Treatment options

Option

When to use it

What SofIA Governance requires

Mitigate

You will apply controls to reduce the likelihood or impact.

Controls and a closed action plan before assessing the residual.

Accept

The risk is within what your company tolerates.

Nothing additional for the residual. Formal acceptance is recorded by the committee.

Transfer

You pass the risk to a third party, for example with insurance or a contract.

Nothing additional for the residual.

Avoid

You stop doing the activity that creates the risk.

Nothing additional for the residual.

Whatever the option, the Treat the risk window only saves if you choose at least one control in Risk controls.

Steps to mitigate a risk

  1. Open the risk's page and, in Treatment and controls, press Treat the risk.

  2. In Treatment option, choose Mitigate.

  3. If the risk has threats, Controls suggested by the risk's threats appears: the ISMS controls the catalog indicates for those threats, with the threats each one mitigates. Press one to add it, or Add all.

  4. To add others, type in Search an ISMS control to add… and press the result.

  5. For each chosen control, indicate:

    • Existing or Proposed: whether it is already implemented or whether it is what the plan will implement. Suggested controls are added as Proposed.

    • The effectiveness (%), which supports the reduction of the risk. Remove a control with the ×.

  6. Fill in the plan details:

    • Plan title: if you leave it empty, it is generated from the risk's code and name.

    • Due date (required).

    • Owner: by default, the risk owner.

    • Description: if you leave it empty, it is built from the codes of the proposed controls.

  7. Press Save and create plan.

The plan is created with Critical priority if the inherent risk is critical, High if it is high, and Medium in all other cases.

What happens next

You'll see Action plan PA-… created. Close it to assess the residual risk.

  • The plan includes the proposed controls; if you didn't mark any as proposed, it includes all the chosen ones.

  • The plan appears in ISMS → Action plans with origin Risk and type Risk treatment, and in the Action plans section of the risk page.

  • If the risk was Identified, it changes to In treatment.

  • Affected standards is recalculated with the new controls.

  • The residual stays locked until the plan is closed. See Assess the residual risk.

Associate controls with a risk that is not mitigated

A risk that is accepted, transferred or avoided can also have controls, for example the ones that support the contract or the insurance.

  1. Press Treat the risk and choose the option.

  2. Add the controls and press Save treatment.

No action plan is created. The option is saved on the risk and you'll see Treatment saved.

If the risk was set to Mitigate and you change to another option, its Risk treatment plans that are still open or in progress are cancelled automatically, with a note in their Follow-up notes explaining the change. Plans linked to the risk that came from another origin (an incident, a finding…) don't change.

Change the controls of a risk that already has a plan

While the risk has an open or in-progress plan, saving the treatment doesn't create another plan: it updates the risk's controls and the open plan adds the new proposed controls.

If all the risk's plans are closed or cancelled and you choose Mitigate, the plan details are requested again and a new one is created. Use this when the risk needs another round of mitigation.

Common errors

Situation

What to do

The save button is disabled

Add at least one control and, if a plan will be created, fill in the Due date.

You must set the due date of the action plan.

Fill in the Due date.

Controls … are excluded from the SoA

That control was marked as not applicable. Choose another one or review the SoA.

When changing a risk that already had a residual to Mitigate, you see To mitigate you must select the controls and create the plan…

The residual from another option doesn't support a mitigation. In Assessment, set Residual likelihood and Residual impact to — Not assessed —, press Save residual and treat it again.

No suggestions appear

The risk has no threats, or its threats are custom (they don't come from the catalog).

Related

Search SofIA Governance

Type at least 2 characters to search SofIA Governance.

↑↓ to navigate · Enter to open · Esc to close