Read the risk matrix
Explore the single ISMS matrix in its inherent and residual views, filter by affected standard and review the risk list.
On this page
The risk matrix shows each ISMS risk by its likelihood and impact. There is a single matrix for the whole company: each risk shows which standards it affects, and you can filter the matrix by one of them. It tells you how many risks you have, which ones still have no residual and which ones exceed the level your company accepts.
Before you start
Any role can view the matrix.
You don't need to choose a standard: the matrix belongs to the ISMS. Standards are used for filtering.
Steps
Go to ISMS → Risk matrix. You can also get there from a standard's detail page with the Risks affecting it button, which opens the matrix already filtered by that standard.
If you want to see only the risks of one standard, choose it in the list at the top (by default, All standards). A notice reminds you of the filter; press Show all to remove it.
Review the four total cards:
Card | What it counts |
|---|---|
Active risks | Risks that are not closed (with the filter, only those of that standard). |
Residual assessed | Those that already have a residual risk. |
No residual | Those that don't have one yet. |
Above accepted level | Those that exceed the ISMS accepted level. It uses the residual if there is one; otherwise, the inherent. Below the figure you see Accepted level: and the value. |
Choose the view with the Inherent risk (without considering controls) or Residual risk (after applying the treatment controls) buttons.
How to read the matrix
Rows are impact, from highest (top) to lowest. Columns are likelihood, from lowest (left) to highest. The legend reminds you: Impact ↑ · Likelihood →.
Each cell shows its score, which is likelihood × impact. If you hover over it, you see the full calculation.
The cell color shows the risk level according to the ISMS thresholds. The legend below the matrix shows each level with its score range.
If a cell has risks, the … risk(s) button appears. Press it to open Risks in the cell, with the code, name and affected standards of each risk. Press a risk to open its page.
With the default values, the matrix is 5 × 5 and the levels are:
Level | Score |
|---|---|
Low | 1 to 4 |
Medium | 5 to 9 |
High | 10 to 16 |
Critical | 17 to 25 |
Likelihood labels go from Very unlikely to Almost certain, and impact labels from Insignificant to Catastrophic. The size, labels, levels and accepted level are changed with Configure matrix. See Configure the risk matrix.
Side panel
Distribution by level counts how many risks there are at each level for the view you chose. Compare Inherent risk and Residual risk: the difference shows whether the treatment worked.
Affected standards lists each standard with the number of risks that affect it. Press one to filter the matrix; press it again to remove the filter.
Matrix scale shows the size and the accepted level of the ISMS. A risk above the accepted level requires treatment or formal acceptance by the committee.
Risk list
Below the matrix is the Risks list, sorted from highest to lowest inherent score. Use Search risks… to filter by name, description, code or category, and the status list to see only one. Press a row to open the risk's page.
Column | What it shows |
|---|---|
Risk | Code (RSK-0001…) and name; below, the affected dimensions (C, I, A), whether it is a privacy risk and the owner. |
Affected standards | The standards calculated from the risk's controls and, marked (manual), the ones assigned while it has no controls. |
Assets and Threats | What the risk affects and what causes it. |
L × I | Likelihood × impact = inherent score. |
Inherent and Residual | The level in each assessment. Not assessed if there is no residual yet. |
Treatment | Mitigate, accept, transfer or avoid. |
Status | Identified, In treatment, Treated, Accepted or Closed. |
The number next to the menu
Next to Risk matrix, in the side menu, a number may appear. It counts the risks with a high or critical inherent level that are still in Identified status, that is, that nobody has started to treat.
The number recognizes the levels by their name (alto and crítico, the default names of the High and Critical levels). If you rename them in Configure the risk matrix, those risks are no longer counted.